Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - 2JZ-GTE VVTi S13 build

Skinny5racing · 03-05-2021, 09:59 PM

All the components were soaked in carb cleaner to remove the bulk of the sludge. After washing that off, I used the drill method and polished each valve with sand paper up to 1000 grit then re-cut/seated them.

03-05-2021, 09:59 PM	#18
Skinny5racing Join Date: Mar 2020 Location: Las Vegas, Nevada Age: 29 Posts: 13 Trader Rating: (0)	All the components were soaked in carb cleaner to remove the bulk of the sludge. After washing that off, I used the drill method and polished each valve with sand paper up to 1000 grit then re-cut/seated them.