This is really hard for me. I have put so much time and money in this car that it is not funny, at all. I built this car with the intentions of being a reliable and fully streetable monster.
I've decided to sell the car because I'm getting out of the car scene. I'm graduating this semester from Purdue University. I've realized there are so many things I haven't done because I've sunk every hard earned dollar and summer into this hobby. I'm graduating college and hope to leave the nest but I haven't saved a thing. It sucks that it has come to this but I think its the best thing for me to do for myself. This is really hard for me since this is my only hobby and I'm sure we all express the same intense passion for it.
The car is currently at Sound Performance in Bensenville, Il. They have put it together and got it running. I have not seen the car since I dropped it off and left for school which was the 2nd week of august.
Exterior:
Final Konnexion Lenses
Wingless trunk w/ custom center delete
Greddy Gracer Lip
NEW Flint Mica paint, still needs to be wet sanded
rare Advan kreuzer Kev evolutions (4) 17*9+22 *purchased from a member in California who received them on his imported ultra pristine R32 GTR
(4) Falken Azenis RT615 255/40/17 60% tread in rear and 80% in front
Interior:
Everything is gutted behind the Driver's and passenger's seats
Blitz Boost Gauge
Carbon Fiber gauge panel/center dash delete
Gauge-tech
Untitled Document
Transmission/drivetrain:
Soarer R154
Shifter extension
Spec Stage 2 clutch (engages easy and grabs great)
Supra Sport Short Shifter *amazing quality and feel
Top Secret Shift knob
s15 HLSD
Brakes:
300zx TT front calipers
SS brake lines
New drilled/slotted rotors and pads
Suspension:
JIC CF front strut bar
Buddy Club racing spec coilovers
Cusco Door bars
Engine:
2jzgte AEM EMS
Phoenix tuning Dr. Tweak 240sx 1jzgte->2jzgte aem ems wiring harness (#1 toyota wiring specialist)
Gm map sensor and 3.5 bar sensor
Soarer 1jz-gte
Greddy Timing Belt
HKS 272 cams
HKS cam gears (the good ones, not the ones that will shred your timing belt)
Greddy timing belt
Garrett DBB GT3076R w/ .82 a/r 3" V-Band
Xspower Manifold (only manifold that was available with a t3 flange)
Tial 38mm External Wastegate re-routed into downpipe
Aeromotive FPR
Dual Walbro 255 fuel pumps
Koyo radiator
Nismo radiator cap
Buddy Club Spec II Exhaust (Loud mode)
Authentic Nismo s14 3" exhaust (quiet mode)
Custom fuel rail w/ 72lb low impedance domestic injectors
Custom engine/trans mounts
Huge thick FMIC
2.5" Powdercoated gold intercooler piping
T-bolt clamps on everything
Rear mounted battery
Oil catch can setup
The car has PS, but the A/c and heat have been deleted. The tachometer or speedometer is not wired up. I intended the Gauge-tech for these purposes, if you click the gauge-tech link, you will read that it will display this through the AEM and much more.
What the car needs:
The car runs GREAT. It made 320 whp at 13 psi BUT it only revs to 5800-6000rpm. It Idles Solid. It doesn't smoke. Starts Up everytime. Its making the power it should, which leads SP and I to believe it's some kind of electrical problem. Sound performance is stumped and honestly I'm sick of dealing with them despite their "great" reputation. I'm at school and its my last semester so I don't have time to source the problem out.
Other than that it will misc things, bulbs, sound system/speakers, Sunroof trim. Your own steering wheel because I am keeping my ballin' mahogany Personal steering wheel for sentimental reasons.
The chassis is extremely extremely clean. The title is clean. The car has not been in any accidents, the underside is super clean also. It was a Florida car. It has around 116k miles. The car has NOT been drifted, the e-brake is still super tight. The dash has some drill holes from a previous planned gauge setup on the passenger side. I was going to just put a cf panel over them to cover them up.
This car is not a joke. The engine setup mirrors that of Ueno's drifting soarer. Imagine how it will respond in a s14 platform. Don't waste my time with BS offers. You guys who have already broken it down know that there is alot of money in the car. The car is one step away from putting a very very big smile on someone's face. I have put alot of time and research in putting this setup together and I hope its not going to a waste.
The car is for sale for only $15,000 FIRM FIRM FIRM x a million. I'm losing an unspeakable amount of money on this. NO TRADES, I already have a DD, 300TE ftw. There's easily almost over twice that amount in the car and more than 15k in parts alone. This is the most fair quick-sale price I have decided upon. SERIOUS INQUIRIES ONLY! Call me (Howard) at 847 217 8897. Pm'ing me doesn't me you are serious!
Sound performance is still in the process of finding the electrical problem so there is a good chance that it will be resolved. If that is the case the price will be 17,500 FIRM.
Here are a few "before" pics of the engine bay. And some pictures of the car getting loaded onto the flatbed to be taken to Sound Performance. REMEMBER: I haven't taken any pics since SP did work on the car, I can ask them to take some pics for me and I'll post them up.
