Quote:
Originally Posted by rc1honda
Guides and shims are all in place. Although the bottom of the ras seems like the rockers have been trying to pop off
|
That's because RAS suck. Let's think about what RAS actually do, in the event that a rocker would fall off it would normally just pop off or break and the valves in that cylinder wouldn't open and you'd have a misfire. Now when you add RAS the rocker can't fall off, well straight at least, more than likely you'll get a rocker stuck crooked over a valve or two hanging them open to punch a few holes in a piston ruining the short block and the head. But hey at least those RAS stopped the rocker from popping off right?
If you're really concerned about rockers flying off do a dual guide and solid pivot conversion, don't throw band aids at your problem.