Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - 1995 s14 Bare bones race wiring. Which Ecu wires need power to start Ka24de without c

Streetdeezie · 07-22-2020, 05:03 AM

Which pins/wires need power on 1995 Ka24de ecu to start engine with no factory chassis harness? I have made a bare bones race car wiring panel with a fuse panel and relays. I combined all the ground wires on ecu and also pins 56 and 61 being they are labeled power supply for ecu. The engine will not start with just those power wires. The only other pins I can see that may need power are pins 4-ECU rely(self shut-off),20-ignition/start signal,38-ignition switch,and both 70 pins-power supply(back-up). Does anyone know which pins need constant power and temporary power?

Sent from my iPhone using Tapatalk

07-22-2020, 05:03 AM	#1
Streetdeezie Join Date: Aug 2019 Location: San Clemente Posts: 7 Trader Rating: (0)	1995 s14 Bare bones race wiring. Which Ecu wires need power to start Ka24de without c Which pins/wires need power on 1995 Ka24de ecu to start engine with no factory chassis harness? I have made a bare bones race car wiring panel with a fuse panel and relays. I combined all the ground wires on ecu and also pins 56 and 61 being they are labeled power supply for ecu. The engine will not start with just those power wires. The only other pins I can see that may need power are pins 4-ECU rely(self shut-off),20-ignition/start signal,38-ignition switch,and both 70 pins-power supply(back-up). Does anyone know which pins need constant power and temporary power? Sent from my iPhone using Tapatalk