|
Update for anyone reading
Known problem: injectiors not firing. All 6
-Test light testing showed power to both wires at all injectors key on
-connecting the test light across both wires and cranking did not cause it to flicker on and off with pulses from the ecu
-eccs relay os fine and sends power to the injectors common wire
The ground side of the injector circuit goes from the injector to the ecu, thats it so there is either something wrong with the harness, the ecu or your ground setup
I have a brand new wiring specialties harness so that is pretty unlikely. So i swapped the ecu. Same problem power to both sides of the injector and no firing. Now im going to recheck grounds at the ecu with a test light.
__________________
 Natural selections finest
|