Quote:
Originally Posted by Teddys14
Yeah I spliced into the wires that connected to the actuator, flipped the unlock/ lock switch, then it would read 12V when flipped. So since there was power going through and the actuator not flipping, I’m assuming it’s the actuator. I also took my passenger side door panel off and unplugged the actuator (since the passenger side worked) and plugged it into the driver side actuator and when I flipped the unlock/ lock it didn’t budge.
|
so...… now take the PASSENGERS side actuator, and plug it into the drivers side wiring harness. make sure that shit works. if it does, THEN just replace the actuator.