Keep us updated! I just finished my swap with the SRVQ kit as well. I also am using the drift freaq motor and transmission mount so if it the issues is resolved for you, I?ll be placing an order as well! Thanks for keeping this thread alive!
Quote:
Originally Posted by slider2828
Cool thanks!!
I am going with some bmw spec e46 shorty engine mounts. Based on the research it should be close to 57mm in height. I am shooting for the engine mount to be 58mm...
For posterity,
GTR and Z32 is too tall 79mm
Nismo sr20 engine mounts 73mm
Drift freaq is 69mm
Gktech is 65mm
Condor speed spec e46mm should be 57mm as they claim it drops the engine 10mm off stock which is 67mm...
Will report back but its 100% drive angle for sure because diff was inspected by 2 reputable rear engine shops and cd009 is 30k miles and basically new.
|