Quote:
Originally Posted by Kingtal0n
Set the lobes facing outwards. Count the 20 links between the dots. The cam lobes both face out and about 2 or 3 degrees, very little bit upwards. So they wont be perfectly flat or 180* across, each lobe facing out will also face a tiny bit upwards.
|
my bad meant to reply earlier (been busy with work).
I finally got a consult port/adaptor in the mail so going to try it out to see, I wonder if my idle may be too high to set the timing properly (tach doesn't work) it doesn't seem to idle too high but it could be a little off since i have no way to read it.
Also another thing I was thinking about is obviously all the CAS from SR's are interchangable, I wonder if lets say for example a S14 or S15 CAS on a S13 SR changes it's position maybe? just a thought but never heard anyone talk about that before.