Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

kaptin · 10-03-2014, 02:48 PM

Hello Zilvia,

I've been working on my chassis harness and have put together a good bit of info to help me stay organized... Hope someone else might find it useful.

My coupe does not have A.B.S., and as I understand that is the biggest differences in the chassis harness for the s13.

I am also not running fog lights, ac, or the A.S.C.D.

All the info was pulled from the 1989 F.S.M.

PLUGS NOT LISTED

E5 - REAR WASHER MOTOR
E6 - FRONT WASHER MOTOR
E7 - FLUID LEVEL SWITCH
E12 - INHIBITOR SWITCH
E13 - REVOLUTION SENSOR
E14 - INHIBITOR SWITCH
E15 - TO SOLENOID VALVE SUB-HARNESS
E43 – Dropping resistor
E44 – Compressor
E46 – A.I.V. control solenoid valve
E51 – To engine room harness (E28(FOG HARNESS))
E52 – Front fog lamp R.H.
E53 – Front fog lamp L.H.
E54 – Front wheel sensor L.H.
E56 – Actuator
E58 – A.S.C.D. actuator
E106 – Key lock solenoid
E114 – To E.F.I. harness (F3)
E115 – To E.F.I. harness (F4)
E116 – To E.F.I. harness (F5)
E117 – A/T control unit
E118 – A.S.C.D. control unit

Pinout for the S.M.J. (E101)

Plugs and Pinouts

Wire Colors and Wire routs

Fuse box labels

Again I hope this helps. Zilvia has been a huge help on my build and I'm hoping to give back a little. Any questions or corrections, lemme know.

Thanks guys!

10-03-2014, 02:48 PM	#1
kaptin Join Date: Nov 2013 Location: kentucky Age: 34 Posts: 11 Trader Rating: (0)	S13 Chassis Harness and S.M.J. Pinout Hello Zilvia, I've been working on my chassis harness and have put together a good bit of info to help me stay organized... Hope someone else might find it useful. My coupe does not have A.B.S., and as I understand that is the biggest differences in the chassis harness for the s13. I am also not running fog lights, ac, or the A.S.C.D. All the info was pulled from the 1989 F.S.M. PLUGS NOT LISTED E5 - REAR WASHER MOTOR E6 - FRONT WASHER MOTOR E7 - FLUID LEVEL SWITCH E12 - INHIBITOR SWITCH E13 - REVOLUTION SENSOR E14 - INHIBITOR SWITCH E15 - TO SOLENOID VALVE SUB-HARNESS E43 – Dropping resistor E44 – Compressor E46 – A.I.V. control solenoid valve E51 – To engine room harness (E28(FOG HARNESS)) E52 – Front fog lamp R.H. E53 – Front fog lamp L.H. E54 – Front wheel sensor L.H. E56 – Actuator E58 – A.S.C.D. actuator E106 – Key lock solenoid E114 – To E.F.I. harness (F3) E115 – To E.F.I. harness (F4) E116 – To E.F.I. harness (F5) E117 – A/T control unit E118 – A.S.C.D. control unit Pinout for the S.M.J. (E101) Plugs and Pinouts Wire Colors and Wire routs Fuse box labels Again I hope this helps. Zilvia has been a huge help on my build and I'm hoping to give back a little. Any questions or corrections, lemme know. Thanks guys!