Oil pan was in really bad shape and leaking
Found one on Facebook for $20, just needed some TLC
All together looks like that now
There was an unwelded bolt from Power Brace inside chassis arm, so i had to work to remove it and make it work again
Ok, the idea was painting the car with Spray Can, i choose a Metallic paint because is better for those who doesnt know how to paint
metallic gives u a smother finish than flat colors
so i start Testing for Silver match color, but found i really like this VHT Cast Alum color
Things are getting pretty serious here so i better get a Canopy to work under
So..i found this Canopy FRAME on Craigslist for $30..i went for it
just need some Free Harbor Freight tarps to make a roof and voila!
Painting the sway bar
Trunk bay was pretty shitty
It was a Lo-Jack GPS receiver hidden at the Trunk
Visors had some dirt
This was the best cleaner i ever used, i use it for everything, even cleaning engine grease
u can find at 99cents store
It worked, but it had sun marks
Inside engine bay is all about Dirt
i found a hood insulation cover in better condition at the junkyard.. so i grab it
Got some coupe trunk panels at junkyard aswell
and some other accessories
Right side wheel had a blown bearing, it feels like lose
so start to taking all apart
Because real mechanics wear Chanclas (?)
got an Impact gun from Craigslist for $15 (with 19/21/24/26/27/31 sockets)
Ordered from RockAuto a new TIMKEN bearing #510031 (inside came an NSK Japan bearing)
Wheel Fix continued.. (Q45 Calipers)
Ok, RUST and Metal are not best friends, so if you want to know how to remove rust FOR CHEAP
Watch my How-To video
Rotors had too much rust and i wanted to get all parts a Refresh start
so i remove all rust from them
Then some Primer and Paint
And started to clean and paint calipers