Hello everyone, Ive decided to begin parting out my RB25DET Kouki S14. It was nut and bolt build to a pretty high specification, very thorough. The car was finished up to the point of paint and body, ran and drove, but never hit the road. Ive begun dismantling in modules, and will first offer for sale in this manner. If there isnt any interest in that, I will begin piecing out. If you want information on something not listed or want to call dibs on something, just message me. Located in Central New Jersey, 08817. Ill start with Suspension and body.
Suspension/Brakes
This suspension/brake setup has been dismantled and will now be offered in separate pieces. Ill update with pictures and prices over the weekend.
Everything was removed in a way that it can be installed very quickly and easily. Its basically everything underneath an S14, from brake house to wheel studs. Every surface is powder coated or painted, every bolt has been replaced or upgraded. This took about 2 hours to remove from the car. Im listing this all together, as there is a lot of custom powder coating to make everything match. This is essentially a bolt in show car suspension/brake package in the easiest way possible. This entire setup can be installed in less than a day, every nut and bolt is included. Please read through the specifications. This is a build thread I made years ago, pretty thorough and shows most of what went into the suspension portion of the build. Tons of labor, powder coating, painting, burning, stripping, esc, esc.
https://zilvia.net/f/showthread.php?t=340727
EBAY strut brace not included, only for holding up suspension
Front/Rear
APEXi N1 EXV Coilovers (new)
Front:
---OEM lower control arms-----------------------------------
SOLD
Energy Suspension bushings (new)
Moog ball joints (new)
Powder coated (silver)
---S14 knuckle---------------------------------------------------
SOLD
Powder coated (matte black)
---5 lug hubs (painted silver)------------------------------------
AVAILABLE
---Yamato garage tension rod (QA1 rod ends) (new)-----------------------------------SOLD
Powder coated (ruby pearl)
BallerBolts 12 point zinc plated bolts (arm to control arm) (new)----------------
SOLD
OEM Bolts (NEW) (Arm to body) -----------------------------------------------------
SOLD
---OEM Strut to Knuckle bolts (new) ---------------------------------------------
SOLD
Rear:
---OEM S14 subframe -----------------------------------------
SOLD
Painted (gunmetal)
Energy Suspension bushings (new)
---J30 limited slip differential (Final Drive 3.9)——————-
SOLD
Redline fluid (fresh) (new)
---S14 axles (cosmetic restoration)————————————
SOLD
Ballerbolts (axle to diff) (new)--------------------------
SOLD
---S14 Knuckles -----------------------------------------------
SOLD
Custom powder coated (black)
Energy Suspension bushings (new)
---Z32 handbrake assembly -------------------------------------
SOLD
Powder coated backing plate (gloss black)
---R33 Skyline GTS handbrake cables (the proper cables for Z32 conversion)----------------
SOLD
---5 lug hubs------------------------------------
AVAILABLE
Painted (silver)
---OEM lower control arm -------------------------------------
SOLD
Powder coated (silver)
Moog ball joint (new)
Energy Suspension bushings (new)
---Yamato rear upper arm (new)--------------------------------SOLD
Custom powder coat (ruby pearl)
---Yamato toe control rod (new)------------------------------------SOLD
Custom powder coat (ruby pearl)
---Yamato traction rod (new)-------------------------------------------------SOLD
Custom powder coat (ruby pearl)
---Ballerbolts fasteners (including eccentric lockout kit) (new)------------------
SOLD
---ST Suspension rear sway bar (new)--------------------------------------
SOLD
Brakes:-------------------------------------------------------
SOLD
---Evolution 8/9 Brembos (new seals) Front
Powder coated silver (ruby pearl decal) Powder cleared
Stainless caliper adapter (new)
---STI Rear brembo (only true bolt on brembo for S14)
Powder coated silver (ruby pearl decal) Powder cleared
---All new brake hardware (front and rear)
---Racing brake ET-500 pads (front and rear) (new)
---Custom Agency Power conversion brake hoses (front and rear)(new)
---Rotora Brake rotors (front and rear) * (new)
*was sent 2 left rear rotors, so one or both rear rotors need to be replaced
[IMG]
Front and rear Brembo brake package (specs above) As mentioned above, there are 2 left rear rotors (shipping error) so one or both rear rotors will need to be replaced. The setup was installed and bled, but never driven on.
$1050 shipped without rotors
$1200 w/rotors plus shipping
[IMG]
[/IMG]
Apexi N1 EXV Coilover (Installed, never driven on) $700
[IMG]
[/IMG]
[IMG]
[/IMG]
Yamato Garage complete adjustable suspension arm package (every arm on an s14) QA1 rod ends, Full BallerBolts.com fastener package (12 point yellow zinc w/ U-nuts) (Installed, never driven on) SOLD
[IMG]
[/IMG]
S14 front and rear lower control arms. Powder coated silver. Factory splash guard. New MOOG ball joints. New Energy Suspension bushings. New Ballerbolts and OEM fasteners. SOLD
[IMG]
[/IMG]
S14 ST Rear sway bar (installed, never driven) SOLD
[IMG]
[/IMG]
S14 axles (cosmetic recondition) SOLD
[IMG]
[/IMG]
J30 LSD Diff SOLD
[IMG]
[/IMG]
Z32 Handbrake assembly. Powder coated backing plates. R33 Skyline GTS handbrake cables (New) The true S14 bolt in cables. $250 SOLD
[IMG]
[/IMG]