Quote:
Originally Posted by My1st240sx
What did you use to fill cracks? Any before pictures? Looks great. Great job
|
Thank you! Unfortunately I didn't take any pictures first. The dash had two 1/4 inch holes drilled in it and several large cracks over the gauge cluster. I first cut the cracks out with a razor at an angle. Sanded the cracks and filled them with padded dash filler. It's made by Urethane Supply Conpany. After several coats and plenty of sanding I cleaned the dash and used Dupli-Color Adhesion Promoter. To get the texture desired I used 3 light coats of black SEM Texture Coating. I then used Dupli-Color flat black Vinyl and Fabric paint. I believe I put 3 light coats. I used the flat black so it wouldn't reflect too much light.