Quote:
Originally Posted by EFITTZY
Alrighty guys quick question: I found a deal on some 18x8.5 +30 wheels I couldn't pass up. I've looked on rimtuck and in the wheel-whore threads without much luck. Just looking for some suggested tire sizes (Wheels are a square set up.) Spacer(s) if any?
I don't mind running a little stretch but nothing super agressive.
Wheels will be going on my 95 zenki. Car has FF type 2 coils, RUCA, rolled fenders, car is low but not on it's nuts...
Thanks in advance!
|
Quote:
Originally Posted by deolio
^you might need spacers. 205/40 all around, maybe 215/40 rear. those wheels are pretty narrow.
|
8.5 isn't that narrow.
I ran 18x8.5 +35 w/ 235/40R18 in the front with about 10mm to the rolled fender. So you could run the same tire size with about 5mm clearance. Or even go up to a 245/40. Those would give you a meaty fitment.
If you want to go with the stretched camber look, go with the 205/40 (215 won't be enough). But you'll need 15-30mm spacers, since 18x8.5 +35 is not very aggressive and will look very sunken with those small, stretched tires and no spacers.
Quote:
Originally Posted by humancola
Welp, fingers crossed.
|
That will fit with a moderate pull of the front and rear fenders.