Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - 1UZFE into S-Chassis

repda916 · 04-08-2013, 09:12 PM

here is my flywheel setup

3sgt Flywheel.
I than had the machinest notch the center and used the stock LS400 Center bolt plate thing as a pressure plate so all the bolts would have even pressure.
Used 7mge ARP Flywheel bolts as they are longer.

Clutch Disc is from a 300zx and the pressure plate is from a 3sgt

04-08-2013, 09:12 PM	#67
repda916 Zilvia Addict Join Date: Jun 2008 Location: cali Age: 32 Posts: 999 Trader Rating: (0)	here is my flywheel setup 3sgt Flywheel. I than had the machinest notch the center and used the stock LS400 Center bolt plate thing as a pressure plate so all the bolts would have even pressure. Used 7mge ARP Flywheel bolts as they are longer. Clutch Disc is from a 300zx and the pressure plate is from a 3sgt