View Single Post
Old 06-02-2010, 11:22 AM   #128
Homer_Simpson
Zilvia Addict
 
Homer_Simpson's Avatar
 
Join Date: Jun 2008
Location: Back in the Bay!
Posts: 619
Trader Rating: (11)
Homer_Simpson is on the path to ruinHomer_Simpson is on the path to ruinHomer_Simpson is on the path to ruin
Quote:
Originally Posted by SoSideways View Post
Oh?

Do tell! haha
The MR2 and some other cars (IIRC Toyotas and Volvos) has serviceable OEM struts with a removable gland nut to hold the internals in the strut tube.

While I was searching for a way to simply hold the 8611-1257 inside a strut tube I found that a lot of people are actually doing this.

They would cut the threaded portion with the gland nut off the MR2 strut tube, measure and modify their own strut tube to fit the 8611, then weld on the threaded section to hold the Koni insert in place.

It sounds a bit convoluted but in the hands of a competent welder I'm sure it will beat the hell out of buying the pipe threading tool money wise.
Homer_Simpson is offline