Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

jaydawg · 07-25-2019, 09:30 AM

Hi All,

I am new here and new to S Chassis. Picked up a 95 240sx project car and have already tore down the engine etc.. It was already out of the car... enough blah blah stuff. I am wondering if anyone he has a good reference for a machine shop in Phoenix. I have a KA24de, everything looks good except for a bent connecting rod. Cylinders measured 89mm so close or with in spec. I plan to go KAT and will use forged internals. I talked to 1 shop already but if you guys have a good one, please let me know.

Thanks
1st post btw.
Jay

07-25-2019, 09:30 AM	#1
jaydawg Join Date: Jul 2019 Location: Phoenix AZ Posts: 2 Trader Rating: (0)	Looking for Machine shop in Phoenix Hi All, I am new here and new to S Chassis. Picked up a 95 240sx project car and have already tore down the engine etc.. It was already out of the car... enough blah blah stuff. I am wondering if anyone he has a good reference for a machine shop in Phoenix. I have a KA24de, everything looks good except for a bent connecting rod. Cylinders measured 89mm so close or with in spec. I plan to go KAT and will use forged internals. I talked to 1 shop already but if you guys have a good one, please let me know. Thanks 1st post btw. Jay