Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

johngriff · 03-20-2009, 11:18 AM

If you have read your FSM, or had rocker arms pop off/ break / crack / lost engines then you might know what I am talking about.

The Nissan Special Service Tool is about $700 and does not work as well as this tool does.

This is put together custom and using a digital gauge. Simply Zero it out on the Guide side, then measure against on the shim and adjust accordingly.

If you have VALVE NOISE, put new cams in, new valve springs, had a recent valve job etc etc this is the tool to cure all of your woes.

This is ready to go to you for $90 Picked up in Long Beach, or $99 shipped in the US.

Paypal to confirmed addresses only!

John
[email protected]

03-20-2009, 11:18 AM	#1
johngriff Post Whore! Join Date: Jun 2004 Location: Long Beach, CA Posts: 4,103 Trader Rating: (4)	Custom SR20 Shim Tip Height Tool If you have read your FSM, or had rocker arms pop off/ break / crack / lost engines then you might know what I am talking about. The Nissan Special Service Tool is about $700 and does not work as well as this tool does. This is put together custom and using a digital gauge. Simply Zero it out on the Guide side, then measure against on the shim and adjust accordingly. If you have VALVE NOISE, put new cams in, new valve springs, had a recent valve job etc etc this is the tool to cure all of your woes. This is ready to go to you for $90 Picked up in Long Beach, or $99 shipped in the US. Paypal to confirmed addresses only! John [email protected] __________________ [email protected]