|
Did the rear main seal seem intact? Ultimate was asking about oil. Yeah if your rear main seal is leaky or otherwise getting stuff on the clutch like leaky shaft seal on the transmission, thatd cause it to slip. Was your flywheel dry when you removed it? How did it look? Have you bled or replaced your clutch master or slave cylinder? How is your pedal pressure? If the shaft on your master cylinder is misadjusted at the pedal, could be trapping pressure and not allowing your clutch to fully disengage. You can adjust the shaft with i believe a 12 or 14mm combination wrench to loosen the retaining nut at the pedal. If its overly tight youd want to shorten it. Anything you did with the car when this problem began?
|