Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Alternate a/c compressor solutions for sr20

xpinoyxmk · 08-21-2018, 01:46 PM

Gonna have to pass. No way to determine if the compressor will last.

On topic, did some research and from what I’m seeing the s13 ka compressor will bolt up using the front two bolts and belts be lined up perfectly. Using that information I cross reference the mounting distance off rockauto to match another compressor from a 2000 Nissan Frontier, this is also a 4 groove pulley but the pulley has a slightly bigger diameter.

The pulley diameter and port closest to the pulley are my concerns as of now.

Edit: Decided to go ahead a purchase the compressor and lines. Should be here by this weekend.

If all fits good, I can get the lines made asap.

08-21-2018, 01:46 PM	#6
xpinoyxmk Zilvia Addict Join Date: Feb 2009 Location: FL Posts: 712 Trader Rating: (11)	Gonna have to pass. No way to determine if the compressor will last. On topic, did some research and from what I’m seeing the s13 ka compressor will bolt up using the front two bolts and belts be lined up perfectly. Using that information I cross reference the mounting distance off rockauto to match another compressor from a 2000 Nissan Frontier, this is also a 4 groove pulley but the pulley has a slightly bigger diameter. The pulley diameter and port closest to the pulley are my concerns as of now. Edit: Decided to go ahead a purchase the compressor and lines. Should be here by this weekend. If all fits good, I can get the lines made asap. Last edited by xpinoyxmk; 08-21-2018 at 05:28 PM..