Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

rbs14kouki · 11-10-2013, 02:19 PM

If i compare to my friend sr20vet ! Hes making 425whp on a mustang dyno

I should get the same out of my set-up if not more

I have a better intake manifold and a turbo jut a bit bigger ! During the winter i wana get a set of p12 cams too so will see how it goes !

As for the sleeved block i went with my tuner advice ! He ran is sr with a gt35 for year over 30psi of boost and never crack a cylinder wall ! He said that under 550whp its not needed

He switch last year cause hes at 40psi and making over 700whp now ! Transmission became is problem so he switch to a g-force t-101

11-10-2013, 02:19 PM	#21
rbs14kouki Zilvia Addict Join Date: Oct 2007 Location: Montreal , Canada Age: 37 Posts: 817 Trader Rating: (1)	If i compare to my friend sr20vet ! Hes making 425whp on a mustang dyno I should get the same out of my set-up if not more I have a better intake manifold and a turbo jut a bit bigger ! During the winter i wana get a set of p12 cams too so will see how it goes ! As for the sleeved block i went with my tuner advice ! He ran is sr with a gt35 for year over 30psi of boost and never crack a cylinder wall ! He said that under 550whp its not needed He switch last year cause hes at 40psi and making over 700whp now ! Transmission became is problem so he switch to a g-force t-101 __________________ AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574 Last edited by rbs14kouki; 11-10-2013 at 03:17 PM..