Quote:
Originally Posted by s13silvia123
you'll have to weld it stated from s14rebuild.
this link will send you to the proper weld nut.
https://www.mcmaster.com/nuts/nut-type~weld/
how to do it? well bolt on the nut to the bolt. then weld the nut with the bolt on. as mentioned above, access it as what S14rebuild said.
i had to this once for the lower control arm for a Lancer where the original weld nut broke off. also from other engineering experiences.
|
sounds good. thanks.
i was hoping a heavy duty or steel one might work, but guess not.