Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

92Blue180sx · 08-27-2018, 11:49 PM

Just went through everything again to make sure I'm not going crazy.

I get 12v at the hot side for EGI and EGI Pump relays, fuse is good and getting power. Turn ignition on and don't hear or feel anything from relays(did continuity check all relays with 12v and all are working.). Still not recieving 12v at the connector topside of fuel pump assembly. Haven't come up with a good way to check continuity between connector for fuel pump and relays. Still replaced fuel pump because why not.

Car still only cranks not a noise from the fuel pump nor does it prime. Does this indeed sound like an issue with the ECU? Desperate to figure this out here, if it sounds like I am missing anything please I'm all ears.

08-27-2018, 11:49 PM	#7
92Blue180sx Join Date: Aug 2018 Location: Florida Age: 27 Posts: 5 Trader Rating: (0)	Just went through everything again to make sure I'm not going crazy. I get 12v at the hot side for EGI and EGI Pump relays, fuse is good and getting power. Turn ignition on and don't hear or feel anything from relays(did continuity check all relays with 12v and all are working.). Still not recieving 12v at the connector topside of fuel pump assembly. Haven't come up with a good way to check continuity between connector for fuel pump and relays. Still replaced fuel pump because why not. Car still only cranks not a noise from the fuel pump nor does it prime. Does this indeed sound like an issue with the ECU? Desperate to figure this out here, if it sounds like I am missing anything please I'm all ears.