Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

shayrgob240 · 05-17-2006, 08:42 PM

Well, I got impatient and I hooked up the green wire to pin #27 (speedometer) on the auto control unit harness and I took the black wire and ran that to ground.

So then I attempted to turn the car on and everything went dead (all teh dash lights). Then I tried again and everything was off. So then I disconnected the neg. battery cable and then put it back on and when I turn the key in the ignition to Accy. the lights turn on but I'm afraid of something happening if I try to crank it again.

So did I wire it right or no? and if not, how am I supposed to do this?

05-17-2006, 08:42 PM	#2
shayrgob240 Zilvia Junkie Join Date: Jul 2003 Location: gurnee, IL Age: 39 Posts: 441 Trader Rating: (0)	Well, I got impatient and I hooked up the green wire to pin #27 (speedometer) on the auto control unit harness and I took the black wire and ran that to ground. So then I attempted to turn the car on and everything went dead (all teh dash lights). Then I tried again and everything was off. So then I disconnected the neg. battery cable and then put it back on and when I turn the key in the ignition to Accy. the lights turn on but I'm afraid of something happening if I try to crank it again. So did I wire it right or no? and if not, how am I supposed to do this?