Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Esserz's LS3 RX-7 FD3S

Esserz · 12-14-2017, 05:59 AM

Made my own wire terminals for battery relocation.

Started wiring in the engine. I went with the PSI conversions wire harness. Quality seems spot on and price is great compared to all other harness manufacturers. I 3D printed a hole size reducer so that the 2inch firewall grommet on the harness would mate up to the existing 3inch hole on the FD firewall.

Heat wrap installed:

I was also able to get the samberg radiator installed:

12-14-2017, 05:59 AM	#42
Esserz Leaky Injector Join Date: Nov 2017 Location: Indiana Age: 33 Posts: 92 Trader Rating: (0)	Made my own wire terminals for battery relocation. Started wiring in the engine. I went with the PSI conversions wire harness. Quality seems spot on and price is great compared to all other harness manufacturers. I 3D printed a hole size reducer so that the 2inch firewall grommet on the harness would mate up to the existing 3inch hole on the FD firewall. Heat wrap installed: I was also able to get the samberg radiator installed: __________________ 1993 FD RX-7----No longer Rotary