|
^^ I put one of those Dakota digital converters on a different car I built a few years back and I could never get it to read accurately across the entire speed range. I found that If I made it accurate on the lower speeds (20/30mph) then at the upper speeds 70/100mph.
ive seen the 'jumpers' on the rear of JDM s14 dash clocks you can move to change the reading but not on the s13 clocks. I did read somewhere that s13 clocks had a potentiometer inside you could adjust but the last set of clocks I took apart broke so I was reluctant to strip these ones down.
|