[Kaisen]

Originally Posted by Kingtal0n

notice the red line in the dyno overlay I posted goes above 300 ft*lbs through the middle range, that 60-1 compressor

here is the dyno video of that run hopefully it embeds
If not here is the full comparison thread with video
http://www.freshalloy.com/showthread...s-Brian-Crower


Notice where the torque exceed 300 ft*lbs boost exceeds the usual 17psi range

some evo dynos for comparison
https://www.socalevo.net/threads/135...P-Green-Turbos
22psi AWD 2.0L


different car 2.0L 21psi AWD


different car 2.0L 29psi AWD FP"red" E85

https://www.evolutionm.net/forums/ev...-thread-3.html

So I guess that's about it then sigh. My tuner set the boost at 1.6 bar, which is about 23 psi. But it drops off to 20psi afterwards