Quote:
Originally Posted by midnight_rex
there is a certain way on shimming solid lifters with rockers. if ur planning to rev high then solid lifters is your best route. just remember re-shimming is mandatory on this kind of valve train setup. here is a write up a guy did a while back...
How to Build a 9000-rpm SR20DET Head
|
That's a good link, but you didn't really try to answer his question....
Hopefully someone will chime in on this.....it's a very good question, and like you said, it seems like it can effect the max valve lift.
IIRC, the guides only come in a single thickness, right?
Also, IIRC from reading the above link, that guy sent the rockers to be machined, because the actual tips of the rocker arms needed to have different angles...
Did you do that to yours?