RB20DET.. One day it'll be done and installed, hopefully in Q1 2007. Still need a bazillion small things...
Here is a close up of the Injector "block offs" I used for intake manifold leak down test. Made from home depot supplies: 1/2" rubber stoppers & some shelving screws 3" long with 1/2" heads, worked great. Set #1 to TDC, use leak down tester threaded into cyl #3 to pressurize manifolds to 2 bar/30psi... Spray down RTV'd areas on lower & upper mani's with soapy water. Not shown is TB blockoff plate made from a 5"x5" smooth wooden peice, drilled for tb bolts & with an improvised RTV gasket to seal with.