View Single Post
Old 09-26-2016, 06:12 AM   #52
MazworxUSA
 
MazworxUSA's Avatar
 
Join Date: Sep 2012
Location: Orlando FL
Posts: 39
Trader Rating: (0)
MazworxUSA is an unknown quantity at this point
Quote:
Originally Posted by dwnshft2drft View Post
And no spacer required for the flywheel?
Yes, there is no spacer involved in this kit, when using our kit it converts the Z33 box to an SR box as far as the bellhousing is concerned, meaning you can use an SR flywheel, clutch, release bearing, slave cylinder, pivot fork, pivot ball, and anything else that I may have missed associated with the bellhousing.

I also read further up about the pilot/roller bearing issue. We now send the roller bearing by default with the kit. We hadn't had to trim a standard style pilot bushing till we tested the kit on an S15 block, after that and the issue with the Tomei crankshafts we felt it would be best to just include the roller style which is shorter to avoid any issues with crankshaft variants.
__________________
Contact: [email protected]; 407-281-1223 +25
MazworxUSA is offline   Reply With Quote