|
Ok so I now have a stable fuel pressure of 40psi. But I have another issue that I'm working on figuring out, but I thought I'd ask here as well:
I'm checking if the injectors are firing by turning on ignition and wiggling the CAS back and forth. I've done this before and was able to see all the injectors fire before. But now, only injector 1 is firing and it's stuck open.
- Is my test method stupid? I think I read somewhere to do it this way.
- Not sure if this is a wiring issue. I have a new wiring specialties pro harness. And I'm sure I've connected and grounded everything. I noticed no continuity between the alternator case and the chassis so I quickly ran a wire between them but still nothing.
- The other reason I'm thinking wiring is because my starter is not turning. I hear the solenoid click, but no rotation. New battery and everything. I'm pulling the starter out tomorrow to test that by itself. I'm also taking the injectors to get checked in order to rule those out.
Sorry for chaning the topic a bit, but would appreciate some advice.
|