pintle cap?
take the intake/intercooler cold pipe off and try to use a shopvac to suck it out through the throttle body (make sure its open).
worst case scenario take the manifold off and shake it out.
If it fell into the cylinder you could remove the spark plug and try to extract it with the age old "gum on a stick" type trick.
If its in the cylinder but you can't see it, you could try agitating it by blowing some air in there with the compressor.
Another way would be to roll the engine over until an intake/exhaust valve is open and blow air through the spark plug hole at, idk, maybe 70 psi and probably blow it out. Maybe even vacuum the TB while blowing air into the spark plug hole.
|