Reserve 2nd post for more
Injectors ID1050x is what I used. Here are the deadtimes. (Master fuel around 7ms to get it started)
https://help.injectordynamics.com/su...ine-management
Trigger offset needs to be set to -100 in the LinkECU software to get it started as well if mechanical base timing set correctly.
UPDATED**** The DIYAutotune Wheel doesn't work on the Linkecu.... It doesn't have the right trigger 1 and trigger 2 signal.
I will need to try the AEM one to see if it is compatible.
Is it plug and play?
Yes its plug and play. Just open up the distributor / CAS and replace the wheel, its just 1 screw.
Then in the software select the new trigger wheel with the correct pickup points
Add Trigger Setup Table in PCLink Software