Quote:
Originally Posted by AlwaysHungry
Hey guys.
Recently bought an Sr s14 notch to throw into my s14. Never have built a car before and I'm still on some last bits and pieces I am currently unsure about.
Also note I have a grimmspeed manual boost controller that's not connected to anything.
First image is me holding a black vacuum line that isn't connected. Unsure where to route to.
https://ibb.co/SrQg0bf
Second is an open port
https://ibb.co/xhLsskw
Third is how should I run or what should I use to connect the vacuum line on the back of the intake manifold to the brake booster? Do I just buy some AutoZone line or is there a nicer solution?
Thanks guys.
https://ibb.co/Y0YSB50
|
#1 should go to your factory fuel pressure regulator and be dedicated.
#2 went to the factory boost control solenoid locates by the turbo. Use as you?d like.
#3 black vacuum hose or a coolant line sized the same will serve the purpose of providing brakes.
*edit, it looks like you are missing the factory hard brake line between the manifold and brake booster.