If you look at my picture notice how in the bottom left hand corner there is a dowel pin next to the bolt holes now diagonally up to the right from that dowel you see this small circular piece that is in two sections with a slit between it halfway what is that? I appreciate you linking me to the fsm but I dont know if the fsm will tell me what that is and also I cant even find the fsm for this transmission the way i took it apart was remove the shifter pins, remove the front bellhousing cover take the snaprings out then put the trans bellhousing down tap off the tail a bit and then put it back down and tap off the bellhousing all the way and last The tail slides right off. Obviously removing the mid section bolts as well.
|