Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - CA FS: C5Z06 2002 Silver, 149k miles, with NEW ENGINE & CLUTCH

rkd350z · 07-06-2019, 02:15 PM

Engine / Clutch and flywheel has less than 1000miles (2 oil changes for break in)
Around 420whp with stock headers.
Engine build goal was to have reliability at high RPM operation and good mid range TQ.
Chassis has 149k

Pass CA emission and clean title registered in CA.

Located in 91011.

Exterior: 7/10
Interior: 8/10
Engine: 10/10

C5 Z06
Blue printed engine rebuilt with all receipts
Engine machine and build
Improved racing Oil pan baffles
Lower pan gasket
New Flywheel bolts
Monster stage 2 clutch kit with light weight flywheel
New power steering hose
New serpentine belt
Pro balancer
Coolant temp sensor
Knock sensor
Knock sensor harness
Engine oil pressure sensor
Engine oil sensor connector
Crank position sensor connector
New denso spark plugs
Spark plug heat shields
GMPP spark plug wires
New 160 thermostat
Exhaust studs
Exhaust nuts
Port and polished 799 heads
Valve springs
Performance seats, seals, dual springs, retainers
Valve cover gasket
Fuel filter
Stainless steel braided teflon racing fuel line and swivel hose ends
Comp cam
Flipped intake mod with K&N intake
Setrab 625 oil cooler with lingenfelter performance sandwich plate
Dewitt radiator
Borla stinger exhaust
And many more...

Hotckis sway bars
Drm aluminum steering rack bushing
DRM spec Bilstein shocks
C4 ZR1 17x19.5, 17x11 wheels
NT555 G2 275/40/17F 315/35/17R
ARP extended wheel studs
Carbotech xp10, xp8 pads
Quantum Front brake cooling duct(3") spindle mounted (great for brake cooling)
Lowered on stock bolts
Corner balanced w 170lbs driver & 1/4 tank of gas @ Westend

Sparco Evo driver seat
Mti racing seat rail
Hardbar harness bar
Cam lock 6pt harness
Vette works harness bottom Anchor
Momo sprint 350mm wheel
NRG hub & adapter

12" Kicker subwoofer
5ch kenwood amp
Kenwood single din head unit
Aluminum interior door sill C5Z
C6 shift knob
swede shift boot
Aftermarket aluminum pedals and foot rest
passenger side mounted fire extinguisher

Fixed headlight
Aci rear spoiler
Front tow hook
Rear tow hitch receiver 1-1/4” (for towing tire trailer)
Trackspec Hood vents

Had this car since 2013 and garage kept it.
Clean title in hand, registered in CA till sep 2019 and will pass CA smog.
All service record in hand during my ownership, including new engine build receipt.
The car rips and handles awesome.
New engine has less than 1000 street miles.

asking $17,500 OBO

Text @ 818-3O7-3850 Andrew for more info!

More pics on:
https://www.corvetteforum.com/forums...nd-clutch.html
More pics on:
https://www.corvetteforum.com/forums...nd-clutch.html
More pics on:
https://www.corvetteforum.com/forums...nd-clutch.html
More pics on:
https://www.corvetteforum.com/forums...nd-clutch.html
More pics on:
https://www.corvetteforum.com/forums...nd-clutch.html
More pics on:
https://www.corvetteforum.com/forums...nd-clutch.html
More pics on:
https://www.corvetteforum.com/forums...nd-clutch.html

07-06-2019, 02:15 PM	#2
rkd350z Join Date: Jan 2010 Location: SoCal Age: 36 Posts: 30 Trader Rating: (0)	Corvette C5 Z06 2002 Silver, 149k miles, with NEW ENGINE & CLUTCH Engine / Clutch and flywheel has less than 1000miles (2 oil changes for break in) Around 420whp with stock headers. Engine build goal was to have reliability at high RPM operation and good mid range TQ. Chassis has 149k Pass CA emission and clean title registered in CA. Located in 91011. Exterior: 7/10 Interior: 8/10 Engine: 10/10 C5 Z06 Blue printed engine rebuilt with all receipts Engine machine and build Improved racing Oil pan baffles Lower pan gasket New Flywheel bolts Monster stage 2 clutch kit with light weight flywheel New power steering hose New serpentine belt Pro balancer Coolant temp sensor Knock sensor Knock sensor harness Engine oil pressure sensor Engine oil sensor connector Crank position sensor connector New denso spark plugs Spark plug heat shields GMPP spark plug wires New 160 thermostat Exhaust studs Exhaust nuts Port and polished 799 heads Valve springs Performance seats, seals, dual springs, retainers Valve cover gasket Fuel filter Stainless steel braided teflon racing fuel line and swivel hose ends Comp cam Flipped intake mod with K&N intake Setrab 625 oil cooler with lingenfelter performance sandwich plate Dewitt radiator Borla stinger exhaust And many more... Hotckis sway bars Drm aluminum steering rack bushing DRM spec Bilstein shocks C4 ZR1 17x19.5, 17x11 wheels NT555 G2 275/40/17F 315/35/17R ARP extended wheel studs Carbotech xp10, xp8 pads Quantum Front brake cooling duct(3") spindle mounted (great for brake cooling) Lowered on stock bolts Corner balanced w 170lbs driver & 1/4 tank of gas @ Westend Sparco Evo driver seat Mti racing seat rail Hardbar harness bar Cam lock 6pt harness Vette works harness bottom Anchor Momo sprint 350mm wheel NRG hub & adapter 12" Kicker subwoofer 5ch kenwood amp Kenwood single din head unit Aluminum interior door sill C5Z C6 shift knob swede shift boot Aftermarket aluminum pedals and foot rest passenger side mounted fire extinguisher Fixed headlight Aci rear spoiler Front tow hook Rear tow hitch receiver 1-1/4” (for towing tire trailer) Trackspec Hood vents Had this car since 2013 and garage kept it. Clean title in hand, registered in CA till sep 2019 and will pass CA smog. All service record in hand during my ownership, including new engine build receipt. The car rips and handles awesome. New engine has less than 1000 street miles. asking $17,500 OBO Text @ 818-3O7-3850 Andrew for more info! More pics on: https://www.corvetteforum.com/forums...nd-clutch.html More pics on: https://www.corvetteforum.com/forums...nd-clutch.html More pics on: https://www.corvetteforum.com/forums...nd-clutch.html More pics on: https://www.corvetteforum.com/forums...nd-clutch.html More pics on: https://www.corvetteforum.com/forums...nd-clutch.html More pics on: https://www.corvetteforum.com/forums...nd-clutch.html More pics on: https://www.corvetteforum.com/forums...nd-clutch.html Last edited by rkd350z; 07-06-2019 at 03:41 PM..