Opened this back up, as I am having issues again
Edit: Closing again. Here are my results.
After tons of digging and testing, turns out my alternator randomly shit the bed. While most people would start there, I was convinced it was the wiring as its known to go faulty.
I found while testing the alternator plug:
With the key off, the white/red wire should have no power. With the key on it should have voltage, similar or identical to the white wire next to it.
With the key off, the white wire had power, 11.3 or so volts. With the key on, 11.3 or so.
This should indicate there is no issue with the wiring as it is communicating to the alternator.
I did a diode test, and it passed with my multimeter. But when autozone tested it it failed. /thread.
Last edited by tuzzio; 05-16-2018 at 08:05 AM..
|