Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

battery1882 · 05-02-2018, 03:08 PM

Few updates..

1. Brembo f50 calipers (44mm 40mm) with 14" floating rotors front
PFC08 pads front

Rears are still z32 calipers/rotors with pads upgraded to Hawk HT-10

2. Volk RE30 Front 18x9.5 +22 Rear 18x10.5 +25

15mm spacer front, 18mm spacer rear. 30mm over fender front, 50mm over fender rear

3. Hankook TD Front 275 35 18 Rear 295 30 18

4. 180sx tails (Left and Right only), ebay center wrapped in black vinyl. reverse cutouts were cut to mimic oem style, stock 240sx lower garnish. This set up will cost significantly less than full kouki setup if anyone is interested.

Onto the pictures,.

05-02-2018, 03:08 PM	#180
battery1882 Zilvia Addict Join Date: Jan 2005 Location: Fullerton, CA Age: 42 Posts: 700 Trader Rating: (13)	Few updates.. 1. Brembo f50 calipers (44mm 40mm) with 14" floating rotors front PFC08 pads front Rears are still z32 calipers/rotors with pads upgraded to Hawk HT-10 2. Volk RE30 Front 18x9.5 +22 Rear 18x10.5 +25 15mm spacer front, 18mm spacer rear. 30mm over fender front, 50mm over fender rear 3. Hankook TD Front 275 35 18 Rear 295 30 18 4. 180sx tails (Left and Right only), ebay center wrapped in black vinyl. reverse cutouts were cut to mimic oem style, stock 240sx lower garnish. This set up will cost significantly less than full kouki setup if anyone is interested. Onto the pictures,. __________________ instagram : battery1882 www.sterculture.com Last edited by battery1882; 05-02-2018 at 03:45 PM..