Figured I should post it in here since I finally decided on my setup. Sorry the picture is large.
Still putting everything together but I'm hoping to have it all done and get the setup tuned on both pump and e56 by early 2017.
1. Early redtop sr20 stock except cams, z33/cd009 trans, OsGiken TS2BD twin disc.
2. JWT S4 cams, 266 dur, .464" lift. Dual rocker guides.
3. Greddy TD06H 8cm 20g, Kinugawa t2/5-bolt turbine housing, wastegate flap welded. CodyAce modded stock s14 manifold with Tial MVs.
4. ID1000's in Radium rail, Tomei Type L FPR with AEM Stainless psi sensor.
5. AEM Infinity 8 ems with custom Wiring Specialties Pro/Infinity harness, wired with ethanol content sensor, boost solenoid, oil psi,
fuel psi, oil temp, water temp, and wideband o2 feedback all to the ecu.
Quote:
Originally Posted by TheRealSy90
|