Quote:
Originally Posted by Kingtal0n
Thats funny, I just tuned an MR2 with the air-water intercooler. The wastegate was set at 15psi, on a stock 1ZZ I told him that would probably be too much because of the compression ratio. He didn't care... said he was building a next engine anyways, so I did it anyways...
She took it like a champ. I was surprised. And as a side note, the temperature of the water in the intercooler barely moved, but again this was only maybe 28lb/min of airflow max.
have pictures somewhere... if want
|
How would pushing as close to 50lb/min effect the temp of the water. Hx35 7 blade claims out can do almost 60 lb/min. I'm pushing 30 psi out of its around 40 max.