Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - This is the roll center, suspension pickup, and steering angle modification thread.

Axel18 · 05-25-2014, 02:18 PM

Question & problem:

-MA motorsport knuckles s13
-Oem flca extended 25mm & notched
-tein rods and several rack spacers
-rack moved forward

So ive adquired a lot of angle. but i havent centered the rack to split the same angle both sides.

My problem is that while uncentered. I have a feasty angle on the driver side but the other side is far from getting the same angle. If i center it ill have the same on both but i will lose a lot from one side to split it. i could have more if the rack travel would let me.

Is there a way to get more rack travel? Or another rack that can be used that may have more travel? Or am i missing something?

Sent from my GT-I9300 using Tapatalk

05-25-2014, 02:18 PM	#6408
Axel18 Leaky Injector Join Date: Oct 2007 Location: Miami Age: 38 Posts: 114 Trader Rating: (3)	Question & problem: -MA motorsport knuckles s13 -Oem flca extended 25mm & notched -tein rods and several rack spacers -rack moved forward So ive adquired a lot of angle. but i havent centered the rack to split the same angle both sides. My problem is that while uncentered. I have a feasty angle on the driver side but the other side is far from getting the same angle. If i center it ill have the same on both but i will lose a lot from one side to split it. i could have more if the rack travel would let me. Is there a way to get more rack travel? Or another rack that can be used that may have more travel? Or am i missing something? Sent from my GT-I9300 using Tapatalk