Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Project: SteeZee

Aaj2k5 · 03-30-2014, 08:00 PM

I've been called in to work every weekend so this has not progressed all month

Matched the DS fenderwell to the PS

Turned these up on the lathe since I don't like paying $$$ for $3 in 6061 T6. Solid diff bushings - new to make a few more for the front of my Q45 diff.

Started sketching my front knuckle to design CTS-V Brembo caliper adapter.

Old setup:

New setup - not shown but welded pipe nipples into the holes like the old setup to sleeve bolts/help crush.

Tacked in place after measuring from a number of reference points.

I'll have new front subframe mounts done next weekend and continue on with cage A-pillars!

03-30-2014, 08:00 PM	#45
Aaj2k5 Leaky Injector Join Date: Sep 2005 Location: Kitchener, Canada Age: 34 Posts: 55 Trader Rating: (0)	I've been called in to work every weekend so this has not progressed all month Matched the DS fenderwell to the PS Turned these up on the lathe since I don't like paying $$$ for $3 in 6061 T6. Solid diff bushings - new to make a few more for the front of my Q45 diff. Started sketching my front knuckle to design CTS-V Brembo caliper adapter. Old setup: New setup - not shown but welded pipe nipples into the holes like the old setup to sleeve bolts/help crush. Tacked in place after measuring from a number of reference points. I'll have new front subframe mounts done next weekend and continue on with cage A-pillars! Last edited by Aaj2k5; 09-03-2018 at 11:22 AM..