Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

jr_ss · 03-09-2014, 07:08 PM

I don't know what my camber is in the rear right now(I should buy a camber gauge) but I'm guessing around -1 or -1.5 with my 285's. I'm not dumped on the frame rails though. I have no intentions of going that low.

Marshall, I'm assuming you have little to no gap on the rears? If so, you're going to be cambered in quite a bit. 20's are too agressive unless you want that "stance" look. I wanted mine to be functional.

03-09-2014, 07:08 PM	#3090
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,413 Trader Rating: (35)	I don't know what my camber is in the rear right now(I should buy a camber gauge) but I'm guessing around -1 or -1.5 with my 285's. I'm not dumped on the frame rails though. I have no intentions of going that low. Marshall, I'm assuming you have little to no gap on the rears? If so, you're going to be cambered in quite a bit. 20's are too agressive unless you want that "stance" look. I wanted mine to be functional. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.