Aw man thats unfortunate, the show was incredible. Skeletonwitch and Enslaved were really good as well but only did short like 30 minute sets.
I actually used positron's old sr20det build thread for the part numbers for the lines behind the intake manifold--
#4427 for the curvy piece
#4374 for the straight piece (it is a curved line that I cut at the elbow)
#4427 for the smaller straight piece (note: same part # as the curvy piece, its the same diameter so just ask them for a straight piece of that size or buy a 2nd curvy piece and chop off the straight end)
For the lines on the actual manifold and the IACV feed/return and the fuel rail, I actually just brought everything in with me. They took me in the back and we matched up everything. Theres 1 large size, 1 medium size that is pretty common for most of the lines, and then 1 pretty skinny size for the fuel lines
|