Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

40flash · 09-25-2012, 06:55 AM

Many thanks to Dudewutup and all that contribute to this thread and the other VQ swap threads. My swap is now running.
It's fixed and running! Halaluliah. A genius at my local Nissan dealership, (Earnhardt Nissan, Mesa AZ) figured out that my MAF sensor was installed backwards in my home made bracket. I had made a very nice aluminum MAF holder because the MAF tube I had bought as a 350Z part turned out to be from something other than a 350z part. I cut the MAF mount off of it and created a new mount. In doing so I put it in backwards and it kept the thing from running and gave me all kinds of evil codes.
The wiring presented on these pages works just fine.

09-25-2012, 06:55 AM	#76
40flash Leaky Injector Join Date: Oct 2009 Location: Arizona Age: 72 Posts: 56 Trader Rating: (0)	Many thanks to Dudewutup and all that contribute to this thread and the other VQ swap threads. My swap is now running. It's fixed and running! Halaluliah. A genius at my local Nissan dealership, (Earnhardt Nissan, Mesa AZ) figured out that my MAF sensor was installed backwards in my home made bracket. I had made a very nice aluminum MAF holder because the MAF tube I had bought as a 350Z part turned out to be from something other than a 350z part. I cut the MAF mount off of it and created a new mount. In doing so I put it in backwards and it kept the thing from running and gave me all kinds of evil codes. The wiring presented on these pages works just fine. Last edited by 40flash; 09-25-2012 at 08:34 PM..