Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

TTZ33 · 05-11-2012, 02:38 PM

Ok. So I measured the shaft its self since you can compress the cylinder. It is 2 3/4 inch. I had alot of tension on it while still on the cars ar and the fork moved almost 3/4 of an inch once it was unbolted. Time to grind. Hope this is the trick.

05-11-2012, 02:38 PM	#19
TTZ33 Join Date: May 2012 Location: York PA Posts: 13 Trader Rating: (0)	Ok. So I measured the shaft its self since you can compress the cylinder. It is 2 3/4 inch. I had alot of tension on it while still on the cars ar and the fork moved almost 3/4 of an inch once it was unbolted. Time to grind. Hope this is the trick.