View Single Post
Old 05-08-2012, 03:47 AM   #324
jdm2191
Post Whore!
 
jdm2191's Avatar
 
Join Date: Dec 2008
Location: Whittier
Age: 33
Posts: 3,717
Trader Rating: (79)
jdm2191 is an unknown quantity at this point
Quote:
Originally Posted by calebbo View Post
This is some serious business right here guys haha and I plan on jumping on the bandwagon. In Mississippi they don't have to much of this going on so I don't have much help like I did when I was in Houston. So here is the list I have so far. Please tell me if I need anything, I just want to swap a 2JZGTE in my S13 so I can use it as a bad arse daily driver LOL.

2JZGTE MOTOR
(ZEROLIFT) $2,500.00

R154 TRANSMISSION
(QUALITY USED TRANS) $1,000.00

MOTOR/TRANSMISSION MOUNTS
(EBAY) $160.00

ALUMINUM DRIVESHAFT
(SHAFT MASTERS) $378.00

GODSPEED RADIATOR
(EBAY) $190.00

MISHIMOTO G LINE INTERCOOLER
(AMAZON) $168.00

EXTENDED SHIFTER KIT WHERE DO I GET THIS AT?
$300.00

FRONT MAIN SEAL
(DRIFT MOTION) $12.85

REAR MAIN SEAL
(DRIFT MOTION) $32.00

IGNITER
(DRIFT MOTION) $150.00

OIL PUMP
(DRIFT MOTION) $185.00

SERPENTINE BELT TENSIONER
(DRIFT MOTION) $132.00

SERPENTINE BELT
(DRIFT MOTION) $25

THERMOSTAT
(DRIFT MOTION) $21.00

TIMING BELT
(DRIFT MOTION) $32.00

COMPLETE GASKET SET
(DRIFT MOTION) $439.00

1JZ FLYWHEEL
(DRIFT MOTION) $275.00

STAGE 2 CLUTCH KIT
(DRIFT MOTION) $425.00

TOYOTA OIL FILTER
(DRIFT MOTION) $6.00

WALBRO FUEL PUMP
(DRIFT MOTION) $115

FULL LENGTH CLUTCH HOSE
(DRIFT MOTION)
[USE WITH S14 OEM MASTER SLAVE CYLINDER] $45.00

ENGINE/TRANSMISSION HARNESS WIRING
(FREEDENGINEERING) $500.00

Questions:
- So I need a flywheel for a 1jz and a clutch kit for a 1jz OR 2jz?

- Are the clutch lines and fuel lines confusing?

I have been researching this the past week and still have questions so please bear with me. If you found anything in my list to not be MANDATORY AND 100% NEEDED to keep my engine reliable then please tell me or if you know of a cheaper product that will put out just as much I'm always open for cheaper alternatives LOL
Well on the R154 you can probably go the easy route if your patient & find one for like $400 on Craigslist, but you'll still need a 1JZ Bellhousing & Shifter Extension but on those 2 items you can get some really good deals on Supramania like I did or hit up Aaron at Driftmotion & he can make you a shifter extension, Aaron is a LEGIT ASS DUDE! Or if your a baller just get a Soarer R154 & its PNP


If you get a Engine set for $2500 im pretty sure you'll get a Ignitor, & if you get a Gasket set you'll get all the main seals btw

When it comes down to PS, Clutch & Fuel Line just get them from Chase Bay they make them for S13 to 1JZ/2JZ with no hassle on your part or can make your own with Earls, XRP or other aftermarket AN Hose & Fittings

& I recommend getting a OEM MK4 TT Fuel Pump, best bang for the buck!

With the flywheel/clutch situation just make sure you get a R154 Flywheel & any 7M-GTE/1JZ-GTE/2JZ-GTE to R154 will work you can go with 7M clutch kits to save money because most 1JZ/2JZ R154 are Expensive
__________________
My Build: The "Coupe De Ville" 1JZ Build!!
jdm2191 is offline   Reply With Quote