Quote:
Originally Posted by patsS14
pm me if you got a non abs s14 driveshaft
|
I have ONE s14 driveshaft left; unable to tell if its abs or not though it's not marked. I know the difference is the length, so I'll post that if anyone has any information regarding that.
Both front and rear sections are large diameters of the same size (I know some shafts the rear section is much smaller); and the length from the diff mounting plate to the front cup (where the splined-shaft stops) is 45".
Based on this information I found online:
Quote:
S14:
Section 1: Coming From Trans (ABS makes no Diff. in Length here)
M/T = 421.0mm (16.57")
A/T = 441.0mm (17.37")
Section 2: Center Bearing/Mount to Diff
Non-ABS = 650.0mm (25.59")
ABS = 636.0mm (25.04")
|
I believe the driveshaft to be a MANUAL NON-ABS.