|
Yes this is actually a modified S14 knuckle.
To fit to S13 you will need to either use a S14 LCA or the ball joints as soreballz said or you can bore it out to 16mm id since ours is 14mm id.
Also as for the shaft of the spindle, ours is 32mm so you have to use a S14 HUB either it being 4 or 5 lug just as long as its 32mm id.
As for it fitting on a S14 it should fit directly.
As for the spacer they are optional to put on, you don't HAVE to use them, we are just providing extra if necessary.
|