Another option for the guys wanting to lower the toe mount on the iron uprights. Im going to give this a shot and ill let you guys know how it works.
If anyone here knows a little hot rod history they used to make jigs for front axles and use a bottle jack and a torch to lower the car. Heating the axle and using the jack to move the spindle mount point up, basically making a home made drop axle. Im going to try and setup a jig that will hold the upright and the bottle jack will keep the toe mount in a straight line. Im pretty sure it should work and I would trust that better than cut and welding cast iron.
__________________
Quote:
Originally Posted by atutt
Or you could have stopped being a lazy asshat and done some research.
|
|