Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

noname7198 · 12-08-2009, 10:03 AM

We started getting ready to fab up the manifold. We are making a stainless top mount for the gt3071r turbo.
We started by bolting on a head flange and taking some measurements for the turbo flange (the steel flanges are only being used for mock up, stainless will be used on the actual manifold).

Then we set the turbo flange and welded supports to hold it in place.

We bolted on the turbo and everything looks good so far.

The next step is to make a jig and fab up the runners.

12-08-2009, 10:03 AM	#182
noname7198 Zilvia Junkie Join Date: Aug 2006 Location: MA Age: 38 Posts: 339 Trader Rating: (4)	We started getting ready to fab up the manifold. We are making a stainless top mount for the gt3071r turbo. We started by bolting on a head flange and taking some measurements for the turbo flange (the steel flanges are only being used for mock up, stainless will be used on the actual manifold). Then we set the turbo flange and welded supports to hold it in place. We bolted on the turbo and everything looks good so far. The next step is to make a jig and fab up the runners.